Bicycle Engine Kit: This 80cc bicycle motors are 2 cycle 3.5 h.p.The best of the best of all these bicycle motors.This bicycle engine kit comes with every thing you need to convert your regular 26" single speed cruiser or a multi speed mountain bike into a motorized bike.
Operates like a moped. You can pedal the bike or start the engine by releasing the clutch lever on the bicycle motor . No rope pulling needed for this motorized bicycle. This bicycle motor gets around 150 miles on a gallon of gas. You can stop or start the engine as you ride. These bicycle motors have a twist grip hand throttle controls speeds to 35 mph. Depending on the gear ratio.
Comes with a 44 tooth Chrome racing Sprocket, with 9 hole mounting to rear wheel & Installation hardware. Requires basic mechanics and simple tools. The 26" cruiser coaster brake type bikes as sold in stores all over USA can be used to make a motorized bicycle. It takes about a few hours to install.
Top three reasons to buy from Kingsmotorbikes.com
- Peace of mind and protection for your product.
- Easy purchase process.
- Best customer service
Bicycle Engine Kit includes: bicycle motor 80cc engine, extra quiet muffler, black Tear Drop Fuel Tank with cap and mounting brackets, chain, 44 tooth Chrome racing Sprocket, with 9 hole mounting to rear wheel & Installation hardware, chain guard, kill switch, clutch lever throttle, instruction manual, every thing you need to put on the bike to make it a motorized bicycle.NOTE: DUE TO THE HIGH VOLUME OF ORDERS THE 80cc MOTOR KITS ARE CURRENTLY OUT OF STOCK, WE WILL HAVE THE ENGINE KITS READY FOR SHIPPING AGAIN BETWEEN JULY 22 AND 25. YOU CAN STILL PLACE YOUR ORDER AND WE WILL SEND AN EMAIL WITH THE TRACKING NUMBER WHEN THE ENGINE KIT IS SHIPPED OUT!
- 80 cc 2 cycle 3.5 h.p.Gas bicycle engine kit with mounting clamps.
- Black exhaust muffler with gasket.
- Black Tear Drop Fuel Tank with cap and mounting brackets.
- Lever Clutch handle Twist Throttle Control... Includes cables.
- Heavy duty chain.
- 44 tooth Chrome racing Sprocket, with 9 hole mounting to rear wheel & Installation hardware.
- Drive Chain idler, Carburetor assembly, CDI ignition assembly.
- Spark plug and engine tools.
- Bicycle frame adaptor.
- Instruction and maintenance manual
(Click on photo to enlarge)
80cc Bicycle Engine Kit: $460.00
SPECIAL SALE: $235.00
NOTE: DUE TO THE HIGH VOLUME OF ORDERS THE 80cc MOTOR KITS ARE CURRENTLY OUT OF STOCK, WE WILL HAVE THE ENGINE KITS READY FOR SHIPPING AGAIN BETWEEN JULY 22 AND 25. YOU CAN STILL PLACE YOUR ORDER AND WE WILL SEND AN EMAIL WITH THE TRACKING NUMBER WHEN THE ENGINE KIT IS SHIPPED OUT!
80cc Bicycle motor kit Comes with a free Bicycle frame adaptor!!!
NO OTHER BIKE ENGINE KIT SELLER OFFERS YOU THIS!Shipping and handling:
Shipping cost for the bicycle engine kit is $46.00 (insurance included!) and is sent 3 business days after the purchase, then you will receive the bicycle engine kit within 3 to 5 business days depending on which state you live in. Standard Flat Rate Shipping Service (United States Only)
- Shipping and handling to Canada: $75.00 (insurance included!)
Buyer FAQs:
Can the kit be used with most bikes if not what kinds or sizes?
regular 26" single speed cruiser or a multi speed mountain bike.
How much oil do you mix with a gallon of gas?
Uses synthetic motorcycle oil. During break in you add 6 ounces of oil to one gallon of gas for your first gallon of gas as well as your second gallon. Be sure not to go full throttle during your first gallon of gas. After the break in ( First 2 gallons of gas) you add 4 ounces of oil to one gallon of gas for the rest of the life of the motor
Can replacement parts be purchased?
we carry every part you need for the bicycle engine kit.
If i receive the kit and parts are missing or broken will you send the replacements?
Yes we will send the replacements if you report the problem immediately and after the shipping company does there investigation. Insurance is included in the shipping and handle cost.
Does the chain have to be cut to fit the bike?
Yes, the chains will most likely have to be cut on most bikes.
60cc PULL START MOTORIZED BICYCLE KIT, BICYCLE ENGINE: This is a Kings motor bikes 60cc pull start Bicycle Engine Kit, it has a rope pull start. It is an Automatic bicycle motor, It does not have a clutch lever. It has a centrifugal clutch when throttle handle is turned and rpm begins and you go just like a gas scooter. New improved bearings, wider cranks will be included ind the kit. Gets around 150 miles on a gallon of gas. With this kit you can convert an ordinary bicycle into a motorized bicycle. Operates like a moped. You can pedal the bike or start the engine by releasing the clutch lever. You can stop or start the engine as you ride. Twist grip hand throttle controls speeds to 30 mph. Depending on the gear ratio. Requires basic mechanics and simple tools. The 26" cruiser coaster brake type bikes as sold in stores all over USA. It takes about a few hours to install. This bicycle motors are great for special projects.
This Bicycle Engine Kit includes:
Bicycle motor 60cc 2 cycle with mounting clamps, Chrome Exhaust muffler with gasket and hanger, silver Tear Drop Fuel Tank with cap and mounting brackets, right hand Twist Throttle Control (Includes cables), heavy duty chain, 50 tooth Chrome Sprocket standard with 5 hole mounting to rear wheel, Drive Chain idler, Carburetor assembly, CD Ignition assembly, W ider cranks Installation hardware,spark plug and engine tools, Bicycle frame adaptor and instruction manual.
Shipping and handling:
Shipping cost for the bicycle engine kit is $46.00 (insurance included!) and is send 3 days after the purchase, then you will receive the bicycle engine kit within 3 to 7business days depending on which state you live in.
Standard Flat Rate Shipping Service (United States Only)
Contact us at:
By phone: (786) 356 5720
From Monday to Friday 10:00am to 5:30pm (Eastern time)
Home - Motorized Bikes- Engine Kit - Bicycle Engine Parts - Gallery - F.A.Q
