Wholesale 2010 GRUBEE SkyHawk GT5 66cc Bike Engine Kits Half Black & Half Std Finish

Please call us at 1-877-354-3733 if you need a larger order.

We can only ship out wholesale orders to APPROVED WHOLESALE ACCOUNTS. Before or immediately after placing your order, you must fill out our wholesale form. Click here for the form at the bottom of this page.
IMPORTANT: Your order will not be shipped unless you have filled out this form.

NationWide Access, LLC's family of websites is happy and proud to to distribute China Gas's GRUBEE SkyHawk GT2B 48cc Bicycle Engine Kits at unbelievable wholesale pricing. These Wholesale GRUBEE SkyHawk GT2B 48cc bike engine kits give 1.95 – 2.2 HP “the little powerhouse engine of the industry.” The only difference compared to the other Grubee 48cc engine kits is the spark plug's design.
These kits are known as the Rolls Royce of motors and have "Black Cat" Mufflers which are EPA Approved and Certified which is why we carry them and the 6-Month Warranty on manufacturer defects.

Each individual SkyHawk GT2B 48cc Bicycle Engine Kit includes:

1. GRUBEE SkyHawk GT5 Brand 2 Cycle 66cc Engine Kit
2. Solid Black/Standard Engine Finish
3. Centrifugal Clutch; Pull Start or Pedal Start
4. Magneto With Solid State CDI Ignition
5. 44-Tooth, 9 Hole Chrome Sprocket
6. 5 Plate Sprocket Kit
7. 2.5 Liter/0.66 Gallon Fuel Tank, Tear Drop Shape (Black Color)
8. New EPA Approved Black Cat Muffler with Heat Shield
9. Push Button Clutch Lever And Cable
10. Twist Throttle With Engine Kill Switch
11. New High Performance Fuel Line
12. Improved Gas Valve
13. Drive Chain Idler
14. New High Performance CNS Carburetor ($65 value!)
15. Chrome Lined Cylinder Wall
16. Head With Center Fire Spark Plug
17. 202 Crankcase Bearings
18. Needle Bearings On Piston Wrist Pin
19. Standard 410 Chain
20. Chain Guard
21. Extra Spark Plug Included In Tool Kit
22. All The Mounting Brackets, Gaskets, And Hardware Including Nylon Locking Nuts
23. Mounting Plate For Larger Bike Frames
24. Complete User Manual (Located under bottom liner in box)/ Installation Manual Is On Our Down Load Page
25. 6-Month Limited Warranty Included - FREE

Wholesale GRUBEE SkyHawk GT2B 48cc (Black Finish) Gallery GRUBEE SkyHawk GT2B 48cc Tool Kit Includes GRUBEE SkyHawk GT2B 48cc ID Badge (The BLACK engine finish is pictured above. This product will come in the STANDARD SILVER finish.) GRUBEE SkyHawk GT2B 48cc EPA Sticker (The BLACK engine finish is pictured above. This product will come in the STANDARD SILVER finish.) We cannot ship ANY Bicycle Motors or Bike Engine Kits to California due to CARB regulations. Wholesale GRUBEE SkyHawk GT2B 48cc Bicycle Engine Kit FAQs: Question: How much weight will this engine kit add to a bike? Answer: The 48cc, 66cc/80cc engine kits will add 24 lbs to your bike. The 49cc engine kit will add 31 lbs to your bike. Note: We suggest a 26" Men's standard V frame bike. Question: What fuel do I use for this engine kit? Answer: This 2 stroke stroke motor kit requires an Oil And Gas Mixture as follows: When New: 16 to 1 (8oz per Gallon) After 2 Tanks Of Break In: 32 to 1 (4oz per Gallon) You should get 100-150 Miles per gallon and achieve 20-40 MPH depending on climate, altitude, bike weight and rider weight Question: How do I start and stop my bike with the GRUBEE SkyHawk GT2B 48cc? Answer: The starting and stopping of this two stroke motor kits is this: You can still pedal bike like normal with clutch lever held in or locked in with button. To Start: It's just like riding a bike normally, hold in the clutch and pedal the bike to get some speed, then release the clutch to "Jump Start" the motor. If you know of or remember jump starting a Manual VW Bug this start method is the same. To Stop: While the engine is running you can hold in the clutch and the engine will idle. Push the Kill Switch on the throttle to kill the motor. The clutch must be held in when the bike is in motion or the motor will keep running.

Bicycle Requirements:

This bicycle motor engine kit fits most Mens 24" and larger bicycles which includes mountain, cruiser, chopper and road bikes with a V-frame with at least a 8.5" height clearance for the engine. Larger frame size requires drilling into bike frame and use of the universal face plate.

Dimensions:

This 48cc bicycle motor engine kit is about 8.5" height 7" length 5" width and fits on most standard 24" – 26" or 25mm 29mm frame bicycle frame tubes. Larger frame size requires drilling into bike frame and use the universal face plate. This engine kit only adds about 24 lbs to your bike.

* Orders received Monday - Friday by 3:30PM PST
are eligible for Same Day Shipping!

We Cannot ship to PO BOXES at this time.
For International and Canadian shipping we suggest UPS STANDARD,
This does not cover Customs Brokerage, Duties, and Taxes… these are charged to the consignee on delivery).
We have found that this is the cheapest way to send packages Internationally and to Canada.

Skills And Experience:

The buyer may need some basic hardware skills, tools, and it takes roughly around 2-3 hours to install and to do some adjustments and fine tuning.

Notices And Disclaimer:

• We cannot guarantee that this kit will fit your specific individual bike(s).
• Due to California Air Resource Board (CARB) regulations we cannot sell to California Residence at this time.
• Operating a bike, motorized bicycle or bike with a bicycle engine kit installed involves some risk of serious bodily injury. Buyer accepts responsibility for any and all vehicle operation that may lead to personal injury, economic loss, social distress, other losses, costs and damages.
• Seller is not responsible for injuries and/or damages resulting from operating this motorized bicycle or bicycle engine kit.
• Seller is not responsible for misuse of this kit or any warranty after installation.
• Not all motorized bicycles are allowed for on road use.
• We make no guarantee as to the road legality of these bike motors.