Menu
Cart 0

Raw Racer III 80cc/100cc Bicycle Engine Kit

  • $ 26900

Add to wishlist

The Raw Racer engine kit has always been a popular choice for the motorized bike enthusiasts and racers. With its durability and reliability, it has always been an easy choice. But now, the Raw Racer is making a big come back.

Introducing the all new Raw Racer III. It now comes with a bigger piston for a ton of torque and huge performance boost. Plus, it is very durable and affordable. This will easily become another favorite in the motorized bicycle community.

NOTE: Top end assembly required for this engine kit.

What's new?
  • 50mm bore single piece cylinder/head (increased weight capacity, lower operating temps, easier starting, sustained power output across varied rpm range)
  • Comes with GT80 Reed Valve & Keihin Carburetor Clone Assembly
  • Silver anti-corrosion coating
  • High performance CDI with Yamaha components
  • Improved magneto
  • High end allen bolts
  • Improved gas cap

This bike motor engine kit includes: 

  1. Raw Racer III 80cc/100cc Engine Slant Head - 3.5HP+
  2. GT80 Reed Valve & Keihin Carburetor Clone Assembly
  3. Standard Engine Finish
  4. Friction Clutch; Pedal Start
  5. Magneto With Solid State CDI Ignition
  6. 44Tooth, 9 Hole Chrome Sprocket
  7. 3 Plate Sprocket Kit
  8. 2.0 Liter Fuel Tank, Tear Drop Shape (Black Color)
  9. Chrome Muffler
  10. Push Button Clutch Lever And Cable
  11. Twist Throttle With Engine Kill Switch
  12. Improved Gas Valve
  13. Fuel Line #2
  14. Idler Pulley Chain Tensioner with Bearings
  15. Chrome Lined Cylinder Wall
  16. 202 Crankcase Bearings
  17. Needle Bearings On Piston Wrist Pin
  18. Improved 415 Chain
  19. Chain Guard
  20. Tool Kit
  21. All The Mounting Brackets, Gaskets, And Hardware Including Nylon Locking Nuts
  22. Universal Motor Mount
  23. Complete User Manual
  24. 6-Month Limited Warranty Included - FREE
  25. Extra Standard Slant Cylinder Head
  26. Improved magneto
  27. Stainless steel allen bolts
  28. Better balanced crank
  29. Upgraded bearings / 60% thicker crank case around bearings
  30. Stuffed crank case
  31. Large intake port (40mm bolt hole width)
  32. Round exhaust port
  33. 40mm crank stroke (more powerful, efficient, and reliable)
  34. Type B piston (high wrist pin)
  35. Long rod (89mm)
  36. Larger 8mm x 1.25 engine mount studs
  37. Dimensions: 9" x 9" x 5"

Question: How much weight will this engine kit add to a bike?
Answer: The engine kits will add about 26 lbs to your bike. Note: We suggest a 26" Men's standard V frame bike. 

Question: What fuel do I use for this engine kit?
Answer: This 2 stroke stroke motor kit requires an Oil and Gas Mixture as follows:

When New: 16 to 1 (8oz per Gallon) 
After 2 Tanks Of Break In: 32 to 1 (4oz per Gallon)

You should get 100-150 Miles per gallon and achieve 30-40 MPH depending on climate, altitude, bike weight and rider weight

Question: How do I start and stop my bike with the Raw Racer III?
Answer: The starting and stopping of this two stroke motor kits is this: 

You can still pedal bike like normal with clutch lever held in or locked in with button. 

To Start: It's just like riding a bike normally, hold in the clutch and pedal the bike to get some speed, then release the clutch to "Jump Start" the motor. If you know of or remember jump starting a Manual VW Bug this start method is the same.

To Stop: While the engine is running you can hold in the clutch and the engine will idle. Push the Kill Switch on the throttle to kill the motor. The clutch must be held in when the bike is in motion or the motor will keep running.

Bicycle Requirements:

This bicycle motor engine kit fits most Mens 24" and larger bicycles which includes mountain, cruiser, chopper and road bikes with a V-frame with at least a 8.5" height clearance for the engine. Larger frame size requires drilling into bike frame and use of the universal face plate.

Gas And Oil Mixture For Fuel Ratio: (Use of a synthetic 2 stroke oil is recommended.)
This bicycle motor engine kit is a 2 cycle/2 stroke design, therefore, a gasoline/oil mixture is necessary as follows:

  • When New: 16 to 1 (8oz per Gallon)
  • After 2 Tanks Of Break In: 32 to 1 (4oz per Gallon)

The engine crankshaft bearings are lubricated from the oil in the gas mix. A rich break in oil mixture ensures bearings will not cease during engine break in period.

Our gasoline operated products are NOT compliant with Environmental Protection Agency ( E.P.A. ) or California Air Resources Board (C.A.R.B) for the use on/off Public roads. Upon purchase, the buyer agrees to use products for racing (closed-course competition) only and NOT for on/off public roads.

Customer Reviews

No reviews yet Write a review

If you need help with installation or troubleshooting, kindly use our Builder Locator to find builders near you. Builders are experts with motorized bicycles.


We Also Recommend

Customer Reviews

No reviews yet Write a review
Sale

Unavailable

Sold Out